Blackstar - HT-20R MKIII - 12-Inch 20W Tube Combo Amp with IR-Based CabRig Speaker Simulator (Black)

EL84s are at the tonal heart of the Blackstar HT-20R MK3 12-Inch 20W Tube Combo Amp, the team has used decades of valve amp design experience to combine the response and character of this classic British valve with a carefully voiced preamp to create wonderfully lush valve tones. From pure boutique cleans, to mild overdrive that cleans up by backing off the guitar volume control, right up to saturated distortion, this amp does it all. From chiming ‘boutique’ cleans, to on the edge crunch, or full-on distortion, HT-20 MK III deliver ‘the sound in your head’.Concentrated, to Concert-RatedThe HT-20R MK III comes equipped with a power reduction feature taking you down to 2W without any tonal compromise, perfect for driving those EL84’s hard at manageable volumes in the studio or home. When you’re ready to take to the stage, switch to full 20W and utilise the XLR DI output to simultaneously feed direct to the sound engineer with incredible sounding cabinet simulation via the CabRig IR-based speaker simulator software. Perfect for Playing and RecordingAlongside providing capture-ready valve tones at any volume, the HT-20R MK III comes equipped with a direct USB-C output which can send 2 channels (left and right) to your DAW, ensuring the easiest way to capture authentic valve tone in recordings without the need for an interface. The best part is that these amps have in-built load protection, meaning you can use them without a cabinet connected for silent practice and recording. IR-Based CabRig Speaker SimulatorCabRig, the class-leading IR-based speaker simulator comes as standard in the HT-20R MK III, offering hundreds of different cabinet, mic, and room combinations. Save your favourite to three presets for easy access directly from the amplifier. Get premium valve tones into your headphones, monitors and mixes. What Does HT Mean‘HT’ stands for ‘High Tension’ and refers to the high voltages used in valve circuits like HT MK III. The HT name goes back to the very beginning of Blackstar and the first products: the HT valve pedals. New CabRig IR-Based Speaker Simulator TechnologyCabRig is the advanced IR-based speaker simulator, delivering mic’d up guitar cab sounds with unparalleled detail. With zero latency and superior flexibility over IR snapshots, CabRig perfectly simulates cabinets and rooms. Dive into its software for exceptional tones via USB or headphones. Patented ISFBlackstar's patented ISF (Infinite Shape Feature) control shifts the response of the three-band tone stack between a US type response at one end and a UK type response at the other. Importantly, in between the two extremes lie an infinite number of tone choices that would be otherwise unavailable. Pro ConnectivityTo suit the home studio recording musician, HT-20R MK III comes equipped with USB-C audio connectivity for pro-recording as well as the XLR CabRig output and 1/4-inch jack TRS Stereo. Power Reduction Down To 2WBlackstar's reliable and transparent attenuation switches the power down to 10-percent of the amp's rated power. The power reduction is achieved not by load resistors, which affect the tone in an undesirable way due to changing the output transformer and speaker reactance, but by controlling the internal working voltages of the power stage, both HT (high voltage) and bias. This limits power output without affecting the tone shaping of the output stage and feedback loop, so your basic tone remains the same, with power amp overdrive occurring at much lower volume levels, giving the feel of a small valve amp verging on meltdown. Record without a CabinetHT-20R MK III has in-built load protection; this means you can use the head for direct USB recording or headphone practice without the need for a connected cabinet, making it the ultimate portable practice and recording rig. | Blackstar HT-20R MK3 12-Inch 20W Tube Combo Amp with IR-Based CabRig Speaker Simulator (Black) | Financing Available.